To Reset Calibration:
Choosing the Reset Calibration command will switch fuel flow calibration settings back to factory defaults.
1.Press MENU twice, select NMEA 2000 or NETWORKING and press ENTER.
2.Highlight FUEL MANAGEMENT and press ENTER. 3. Highlight to ENGINE SELECT and press ENTER. Select the desired engine and press ENTER.
4.Highlight RESET CALIBRATION and press ENTER. The following confirmation message will appear: Are you sure you wish to Reset Calibration? Select YES and press ENTER. Calibration settings for the selected fuel have been returned to factory defaults.
To Reset Trip:
The Reset Trip function allows you to reset to zero the running total of fuel used on a particular trip.
1.Press MENU twice, select NMEA 2000 or NETWORKING and press ENTER.
2.Highlight FUEL MANAGEMENT and press ENTER. The Fuel Management menu will appear.
3.To reset trip fuel used for a particular engine, highlight ENGINE SELECT and press ENTER. Select the desired engine or All Engines and press
ENTER.
4.Highlight RESET TRIP and press ENTER. The following confirmation message will appear: Are you sure you wish to Reset Trip?
5.Highlight YES and press ENTER. The Trip Fuel Used figure has been reset to zero.
To Reset Seasonal:
Your unit can track fuel usage not only for trips, but also for entire seasons. The reset seasonal command allows you to reset to zero the running total of fuel used during a season.
1.Press MENU twice, select NMEA 2000 or NETWORKING and press ENTER.
2.Highlight FUEL MANAGEMENT and press ENTER.
3.To reset seasonal trip fuel used for a particular engine, highlight
ENGINE SELECT and press ENTER. Select the desired engine or All Engines and press ENTER.
4.Highlight RESET SEASONAL and press ENTER. The following confirmation message will appear: Are you sure you wish to Reset Seasonal?
5.Highlight YES and press ENTER. The Seasonal Fuel Used figure has been reset to zero.
42
