3.1.3.5 Boot Adapter List Menu
The Boot Adapter List menu specifies the order in which adapters boot when more than one LSI Logic host adapter is in a system. You can select up to four of the total adapters in a system as bootable; however, you can use only one of the four “active” adapters to control a Boot Volume.
To select this menu:
1.Press F2 while on the Main menu to move the cursor to the menu area.
2.Move the cursor to Boot Adapter List with the arrow keys.
3.Press Enter.
You can add or delete adapters using this menu. To add an adapter to the boot list, press the Insert key while on the Boot Adapter List. Use the arrow keys to select the desired adapter and press Enter to add it to the end of the Boot Adapter List.
To remove an adapter from the boot list, press the Delete key while on the desired adapter in the Boot Adapter List. You can also change the boot order by using the “+” or−“”keys. For example, place the cursor on the adapter that you want to change, and use the “+” or−“”key to raise or lower the boot order.
3.1.3.6 Global Properties Menu
The Global Properties menu allows you to pause if an alert message has been displayed, to view display boot information, and to set display and video modes.
3.1.4 Exiting the Intel BIOS Configuration Utility
The Exit menu for the Intel BIOS Configuration Utility is used for all five of the menus listed above. However, the available functionality is different for the Main menu and the four subordinate menus.
BIOS Features |
Copyright © 2001, 2002 by LSI Logic Corporation. All rights reserved.