Figure 4.2 Completing Floppy Disk Installation

This package contains scripts which will be executed with superuser permission during the process of installing this package.

Do you want to continue with the installation of <ITImpt> [y,n,?] y

Installing LSI Logic/IntraServer FusionMPT(tm)

Fibrechannel/SCSI drivers as <ITImpt>

##Installing part 1 of 1. /kernel/drv/itmpt /kernel/drv/itmpt.conf

[ verifying class <none> ]

##Executing postinstall script. installing /kernel/drv/sparcv9/itmpt

Installation of <ITImpt> was successful.

Step 3. The itmpt device driver is now installed. Reboot the machine to reconfigure the system and to recognize the new devices.

Distribution File Install – If you received the drivers in an itmpt_install.tar.Z file, follow these steps:

Step 1. Uncompress and untar the itmpt_install.tar.Z file by typing the following commands to create a directory named install:

uncompress itmpt_install.tar.Ztar -xvf itmpt_install.tarcd install

Step 2. Execute the pkgadd process as described in the previous section to add the itmpt driver to the operating system:

Note: If you change the disk drive configuration of your machine, it may be necessary to issue the command:

touch /reconfigure

and then reboot the system to allow the system to detect and correctly install your new disks.

4-6

Solaris Software Requirements

Copyright © 2001, 2002 by LSI Logic Corporation. All rights reserved.