To exit from the Adapter Properties, Device Properties, Boot Adapter List, or Global Properties menus, use these exit options:

Cancel exit

This option returns you to the previous menu.

Save changes then

This option implements any changes you made on the

exit this menu

previous menu and returns you to the Main menu.

Discard changes

This option restores the default settings and returns

then exit this menu

you to the Main menu.

To exit from the Main menu, use these exit options:

Cancel exit

This returns you to the Main menu.

Exit the Configuration

This option exits the configuration and automatically

Utility

reboots your system.

Important: If you reboot the system without properly exiting from this utility, some changes may not take effect.

3.1.5 Fcode

LSI Logic Solaris-capable Fusion-MPT host adapters have Fcode resident on board, allowing operation under Sun’s openboot console. All basic functionality is available at openboot, including the ability to display devices connected to the adapter, and boot devices on the adapter.

3.1.5.1 Fcode Features

The LSI Logic FC Fcode features support for:

•Solaris Sparc 2.6, 2.7, and Solaris 8 Open Firmware environments

•Root Boot device selection from any target device

•Standard command line interface, with help query

•Configuration options and selection for each host adapter

3.1.5.2Identifying the Fibre Channel Disks

The probe-scsi-allcommand is used to identify the Fibre Channel devices on the Fusion-MPT adapter.

3-6

BIOS Features

Copyright © 2001, 2002 by LSI Logic Corporation. All rights reserved.