Floppy Disk Install – If you received the drivers on a floppy diskette, follow these steps:

Step 1. Place the diskette in the floppy drive and execute thevolcheck command to ensure the system sees the floppy.

Step 2. Execute the pkgadd procedure to add the itmpt driver to the operating system.

Example: pkgadd -d floppy/floppy0

You will see the display on the screen as shown in Figure 4.1 and Figure 4.2.

Figure 4.1 pkgadd Procedure

The following packages are available:

1 TImpt LSI Logic/IntraServer FusionMPT(tm) Fibrechannel/SCSI drivers

(sparc) itmpt kit version 1.1

Select package(s) you wish to process (or 'all' to process all packages). (default: all) [?,??,q]: 1

Processing package instance <ITImpt> from </floppy/intraserver>

LSI Logic/IntraServer FusionMPT(tm) Fibrechannel/SCSI drivers (sparc) itmpt kit version 1.1

IntraServer Technology, Inc / LSI Logic

Using </> as the package base directory.

##Processing package information.

##Processing system information.

2 package pathnames are already properly installed.

##Verifying disk space requirements.

##Checking for conflicts with packages already installed.

##Checking for setuid/setgid programs.

itmpt Device Driver

4-5

Copyright © 2001, 2002 by LSI Logic Corporation. All rights reserved.