LSISAS6160 SAS Switch User Guide | Chapter 4: SAS Domain Manager Command Line Interface |
4.2.7 Show Command(Intra-Domain) Use the show command to display domain, device, and phy information. (See Section 4.3, Sample Output for Show Command, to view samples of the kind of information that is returned.)
Authority: User
Syntax:
show alias [<alias>]
show device [<sas address><alias>] show domain
show phy [(<sas address><alias>)[:<phy>]] show version
show zonegroup [<name>]
show zoneset [activedata <name>]
Usage:
show alias
Displays a list of all aliases.
show alias <alias>
Displays detailed information for a single alias.
show device
Displays a table of all devices (expanders and end devices) in the domain.
show device <sas address><alias>
Displays detailed information about a particular device (expander or end device). SES environmental data is a subset of the information displayed for expanders.
show domain
Displays all domain overlays and their bindings to physical domains, flagging the domain currently under focus.
show phy
Displays, in a tabular format, all expander phys residing in the domain.
show phy (<sas address><alias>)
Displays, in a tabular format, all phys residing on a specific expander.
show phy (<sas address><alias>):<phy>
Displays detailed information about a particular phy.
show version
Displays version information for both
show zonegroup
Displays a list of all zone groups.
show zonegroup <name>
Displays detailed information about a single zone group.
show zoneset
Displays a list of all zone sets.
show zoneset active
Displays the name and detailed information for the active zone set.
show zoneset data <name>
Displays detailed information about a single zone set.
LSI Corporation September 2010 | Page 63 |
