yV u can view the playback of
CR tapes (Video Disc
Players, camcorders, etc). by using the AUDIO and VIDEO
INPUT jacks (on the rear of the
TV).
For example: to view the playback of a VCR tape:
_,,_ Connect the VIDEO and AUDIO IN(put) jacks on the TV to the AUDIO and VIDEO OUT(put) jacks on the VCR.
_ Press the MENU (M) button
PICTURE AND SOUND FROM
PLAYBACK OF VCR TAPE
RCA PHONO PLUG
j CABLF_ (NOT
SUPPLIED)
,on the remote, then press the MENU • or • buttons to select the word INPUT with the TV's
Note: You can press the
CHANNEL •• buttons to
.select "VCR/AUX" (if it has been added to the TV's channel memory.) See page 7 for details.
_._ Press the (+) button to select
the VCR/AUX(iliary) INPUTS
4_ Turn the VCR ON and
PLAY the VCR tape to be
viewed on the TV.
O
gh using the A/V INPUT jacks, return the INPUT display screen on the TV to ANTENNA.
If you leave the TV in the VCR/AUX INPUT mode and there is no signal source connected to the jacks, you will be seeing only a blank screen on the TV.
NOTE: If you have a mono (single audio OUTPUT) VCR, "Y" Connectors are available (from your dealer or Parts Information Center 1 800
pup
=888
(RED_HrrE)[
VIDEO IN
(YELLOW)
_OFVCR
VCR
(EQUIPPED WITH VIDEO AND AUDIO OUTPUT JACKS)
NOTE: THE "TV/VCR" B_N
CAN ALSO BE USED TO PLACE
THE TV IN EITHER VCR/AUX OR
SELF_,C_ CHANNELS 3 OR 4.)
