]_k]rOTE: lf you went through
.L • Setup (in your Quick Use Guide), this task has already been completed for you.
You need to make sure that the TV
is set to pick up either Cable TV stations or Antenna signals. In other words, the TV needs to know whether you have connected a Cable TV signal or a normal antenna to its ANTENNA plug.
Press the MENU (M) button on the remote, then press the MENU • or • buttons to select the word CABLE with the TV's
_,_ Press the (+) button (onthe
I
"IV or the remote) to select either:
YES- If you DO have Cable TV
connected to the TV. Channels
NO- If you have an Antenna connected to the TV. Channels
_ | Press STATUS to clear the |
screen.
@
Try it out. Press
CHANNEL •V buttons
and scan the channels.
Remember, the TV has been set at the factory to select certain channel numbers. See the following page on how to set the TV to select the channels in your
area.
SW•
