he picture for the PIP window an come through the TV's

ANTENNA or VCRIAUX Inputs

(on the rear of the TV.) The PIP

INPUT control simply tells the TV

which one of these two sources it is to show in the PIP window

m-ffdrm

_._ Press the MENU (M) button

on the remote, then press the MENU or • buttons to select

the word PIP INPUT with the TV's on-screen arrow.

_.,_ Press the (+) button to select

the source for the PIP picture:

ANTENNA -

for a picture signal coming

from the ANTENNA input on the rear of the TV.

VCR/AUX -

for a picture signal coming from the Video Input jack on the rear of the TV.

Used for VCR (or other direct video accessory) connections.

Note: The TV's S-VIDEO Input plug cannot be used as a video source for the PIP window. Also, when S-VIDEO is selected for the main screen INPUT the PIP window will will not appear.

(_ Press the STATUS button to clear the screen.

@

Remember, the PIP screen will be blank unless

a signal is connected to the selected source (either ANTENNA or VCR/AUX) on the rear of the TV.

With ANTENNA selected (as the PIP INPUT source), the main screen and PIP window will show the same picture. The VCR/AUX inputs (on the rear of the TV) must be used in order to see a different

channel or picture source in the PIP window.

For details on how to view separate I

programs on the PIP window and main I

._r_n. see the PIP connection .section.

33

Page 33
Image 33
Magnavox 27TP83 C101 owner manual On the rear of the TV. The PIP, Press the + button to select