Magnavox 27TP83 C101 owner manual Gdg, Tape and Play the VCR in a normal manner

.l on the rear of the TV is used

_ rrThe S(uper)-Video connection for the playback of S-VHS VCR

tapes, Video Discs, or Compact Disc Interactive (cd-i) discs. Better picture detail and clarity is possible with the S-Video playback as compared to the picture from a normal antenna (RF) connection.

C-a-gdg

<_ Connect the S-VIDEO IN Jack on the TV to the S-VHS Out(put) jack on a S-VHS VCR.

The S-VHS connecting cable will be supplied with the S-VHS VCR (or Video Disc player.) Also connect the AUDIO IN(put) jacks from the TV to the AUDIO OUT jacks on the VCR.

<_ Press the MENU (M) button

on the remote, then press the MENU • or • buttons to select the word INPUT with the TV's on-screen arrow.

_<_ Press (+) button to select the S-VHSINPUT on the rear of the

TV.

I

<_ Turn the VCR ON and place it in the S-VIDEO or S-VHS

mode. Insert a S-VHS cassette

tape and PLAY the VCR in a normal manner.

O

Remember, when you're a through using the S-VIDEO

IN(put) jack return the INPUT control on the TV to ANTENNA. If

you leave the TV in the S-VIDEO mode and there is no signal source connected to the jack, you will be seeing only a blank screen on the TV.

PICTURE AND SOUND FROM

PLAYBACK OF S-VHS VCR TAPE

RCA PHONO	.€
PLUG CABLES
(NOT SUPPLIED)

VCR

S-VHS VCR

(EQUIPPED WITH S-VIDEO

OUTPUT JACK)

NOTE: THE "I'V/VCR" BUTTON

CAN ALSO BE USED TO PLACE

THE TV IN EITHER S-VIDEOOR

VCR/AUX MODES (AS WELL AS

SELECT CHANNELS 3 OR 4.)

qo