our remote control is set to
ork your TV and many
infrared remote (IR) control
VCRs. However, an easy one-
time step may be necessary
before the remote will work your
VCR.
VCR
Try this initial check to see if
going on to the following section
is necessary.
<_ Press the VCR System
button on the remote.
<_ Point remote toward VCR
I and press the POWER button.
,_ Does the remote turn the VCR
ON?
IF YES, _l and try the other
VCR buttons on the remote. If
they also work the VCR, then
the remote is ready and no
further steps are needed.
If'NO, continue...
©<_ First look up a TWO-DIGIT
I emote code number for your
brand VCR before going through
the simple "1,2,3" steps (on the
following page).
continue to next page
_'VCR REMOTE VCR REMOTE "_
BRAND CODE NO. BRAND CODE NO.
Akai 24, 25, 36 Panasonic 01,02, 52
Capehart 33 Philips 00, 05
Conoid 13 Philips Video CD 37
Curtis Mathes 42 RCA 04, 32, 42, 43, 44
Daewoo 33 Samsung 22, 30
Emerson 20, 31,34, 40 Sansui 49
Fisher 06, 07 Sanyo 13
Goldstar 23 Sears 08
Go Video 45, 46 Sharp 11, 12
Hitachi 03, 51 Shintom 35
JVC 14, 47, 48 Sony 09, 10,41
Magnavox 00, 05 Teknika 26
Matsushita 01,02 Toshiba 18, 19
Mitsubishi 16, 17, 38, 39, 50 Video Concepts 29
Multitech 27,28 Zenith 15
NEC 21
24