Battery remaining indicator | Marantz CDR310, CD Recorder specs

Battery remaining indicator

The recorder operates using commercially available AA size alkaline batteries, the optional Nickel-Cadmium battery, or the optional Nickel-Metal Hydride battery. During operation, the battery remaining indicator is as follows.

	Remaining	Display explanation
	indicator	Display explanation
	indicator

	No display	Nothing is displayed when the AC adaptor is being
	No display	used. The adaptor power supply is valid.
		used. The adaptor power supply is valid.

		There is still ample battery power remaining.

		The amount of battery power remaining has
		decreased to approx. half.

		Only a small amount of battery power remaining.
		There is not enough battery power remaining to
		record or playback. Either replace the batteries with
		new ones, or recharge the rechargeable batteries.

		There is almost no remaining battery power.
		If the “Beep” setting in the menu are set to ON, the
		beep sound will be heard.
		If you continue recording while this indicator is
	Flashing	flashing, recording/playback will stop, and the
	Flashing	recorder will shut down.
		recorder will shut down.

Notes

If the battery type is not set correctly to match the type of battery being used, the battery remaining display may not be displayed correctly.

14

Image 18

Marantz CDR310, CD Recorder manual Battery remaining indicator, There is not enough battery power remaining to

Contents

Model CDR310 User Guide Laser Safety Important Safety Instructions Deutsch EnglishFrançais Nederlands Table of Contents Features Introduction Package contents Setup the power supply P.XX Quick Start Guide Always keep the disc surface clean About DiscsPlayable discs Names and Functions Top side 1MENU/STORE button 4CANCEL button9REC Indicator 2F.REV 5 button Front side Rear side Right side Display Preparations Before Use Using batteriesGuide to battery lifespan AC adaptor connection Safety cautions on handling batteries Installing an optional Ni-Cd or Ni-MH batteryCharging the optional Ni-Cd battery Default value Alkaline Power on/offBattery type settings Basic Operations Battery remaining indicator There is not enough battery power remaining to Setting the clock When DateForm M/D/Y Default value M/D/Y Date form settingsTime form settings Default value 12H MENU/STORE Button Menu SettingsInput RecFormat CD Split Default Date/Time Preset menu Input P.xx Menu operation Schematics Recording to the HDBasic operations for recording Erasing recordings Formatting the HD Detailed Settings for HD Recording Input source settingsDefault value Preset1 MIC Preset2 MIC Preset3 MIC Recording format settings When the channel setting is StereoPage Recording level control settings Operations when manual control is set Default value Preset1 Off Microphone attenuator Phantom power settings Default value Preset1 Off Preset2 Off Preset3 Off Default value Preset1 Off Preset2 4 sec Preset3 4 sec Prerecord Background recording Default value Silent skip Default value Preset1 On Preset2 On Preset3 On Manual track Auto track CD Burning Page CD Split Playing Back HD Data Basic operations for playback Audible search Track accessSearch Fast reverse Playback mode settings You can select the playback mode from the following 4 modes Playing Back CDs CD PlaybackVarious CD playback operations Default value Off / 15 min Auto power off settingsBeep sound alarm setting Default value On When CD is stopped Switching the display modeWhen the HD is stopped When in HD recording or recording paused status When in HD/CD playback or playback paused status Stop Monitor settings Key lock settings Various remote functions Microphone remote connection Initialization of preset settings Margin displayCD-TEXT, ID3 tag Troubleshooting Error Messages Specifications What We Will Pay For Non-transferable warrantyHow You Can Get Service Americas only Limitation of Implied Warranties Holdings Inc