9
Right side
A MIC IN jacks (L/R) (XLR balanced input)
Insert an external microphone plug.
For monaural recording, plug into either the L side or R
side jack.
B DC IN jack
Insert the provided AC adaptor plug.
The power supply is DC15V, 2.3A.
If the AC adaptor plug is inserted while using the recorder
on battery power, the recorder will automatically switch to
adaptor power. Also, if the AC adaptor plug is removed,
the recorder will automatically switch to battery power.
C REMOTE 1 jack
Insert a contact closure plug similar to the one shown
below into this 2.5mm mini jack.
2.5mm mini jack
Switch
You can remotely control playback/recording of the
recorder by opening and closing the switch contact. (☞
P.XX)
D REMOTE 2 jack
Connect microphone remote RC600PMD (sold
separately) to this jack. There is a recording indicator
lamp on the RC600PMD.
E LINE IN jacks (L/R)
Insert RCA audio cable plugs connected to an external
audio device into these jacks to input the signals output
from the external device into the recorder.
F LINE OUT jacks (L/R)
Insert RCA audio cable plugs connected to an external
audio device into these jacks to output audio signals to an
external device (amp, etc.).
G DIGITAL IN/OUT
• IN
Connects to the digital signal output terminal (Coaxial) of
a digital device (DVD, CD, MD, etc.).
• OUT
Connects to the digital signal input terminal (Coaxial) of a
digital recording device (CD recorder, MD recorder, etc.).
DCA BFE G