Marantz DV4001 manual Controls & Displays, Front panel

Controls & Displays

Front panel

1	2	3	4	5	6	7	8
	DVD PLAYER DV4001			PLAY	STOP		PAUSE

STANDBY
POWER
9	0	- = ~

3

English

1STANDBY indicator

•Lights when the unit is in standby.

2Disc tray

•Place the disc here.

3AUDIO EX

•Lights when the AUDIO EX is activated using the AUDIO EX button on the remote control.

•The sound quality of analog audio output is improved by turning off analog video signal output and the front panel display.

•It is applied to CDDA, Super Audio CD (CD Layer) and DTS CD in Play mode.

4HDMI

•The HDMI on/off state toggles when pressed for three seconds or more. When on, the HDMI indicator is lit.

•Pressing this button while HDMI is enabled displays the current resolution. Pressing this button again while the resolution is displayed allows you to select the resolution in the sequence below: 480p Æ 576p Æ 720p Æ 1080i Æ 480p

63 (PLAY)

•Begins playing the disc play.

77 (STOP)

•Stops playing the disc play.

88 (PAUSE)

•Pauses playing the disc play.

9POWER ON/STANDBY

•Press to turn the power on, and press it again to enter STANDBY mode.

10Display

•Operation indications are displayed here.

110 (OPEN/CLOSE)

•Press to open and close the disc tray.

124 /1

•Press to skip reverse title, chapter, or track. You can also press and hold this button to scan the above.

13¡/¢

•Press to skip forward title, chapter, or track. You can also press and hold this button to scan the above.

5HDMI indicator

•When the connected device is HDMI/DVI compatible, the light flashes red.

13