Marantz DV4001 manual Picture Setting, Hdmi Setup, OFF Disables the progressive scan mode

DVD Setup Menu

CONFIRM AGAIN TO USE PROGRESSIVE

SCAN. IF PICTURE IS GOOD,

PRESS OK BUTTON ON REMOTE.

OKCANCEL

3)Press 2 to highlight OK in the menu and press

ENTER to confirm.

The set-up is complete now and you can start to enjoy the high quality picture.

•OFF – Disables the progressive scan mode.

To deactivate Progressive manually:

1)Press OPEN CLOSE 0 to open the disc tray.

2)Press 2 (LEFT) on the remote control. Press

AUDIO on the remote control.

The DVD background screen appears on the TV.

Tip

•There are some progressive scan TVs and high- definition TVs that are not fully compatible with this unit, resulting in an unnatural picture when playing back a DVD Video disc in the progressive scan mode. In this case, turn off the progressive scan feature on both the DVD system and your TV.

PICTURE SETTING

•Default setting: STANDARD

This DVD system provides three predefined sets of picture colour settings and one personal setting which you can define yourself.

•STANDARD – Original colour setting.

•BRIGHT – Vibrant colour setting.

•SOFT – Warm colour setting.

•PERSONAL – Selects this to personalise the picture colour setting. Use the 2/3 keys to select to the setting that best suits your personal preference and press ENTER to confirm. For an average setting, select 0.

•BRIGHTNESS – Increase the value to brighten the picture or vice versa.

•CONTRAST – Increase the value to sharpen the picture or vice versa.

•TINT – Increase the value to darken the picture or vice versa.

•COLOR – Increase the value to enhance the color in your picture or vice versa.

HDMI SETUP

This feature is only applicable if you have connected this DVD system to a HDMI- compatible TV/device.

This setting can be toggled on and off by pressing the HDMI button for three seconds or more. HDMI is on when the unit is shipped from the factory.

Note

•This unit supports HDMI Ver. 1.0.

•This unit does not support HDMI control functions (CEC).

WIDE SCREEN FORMAT

•Default setting: OFF

Selects a suitable screen display. This feature is only available if you have selected TV ASPECT – 16:9 WIDE.

•SUPER WIDE – Selects this to display a 4:3 picture disc on a wide-screen TV with non-linear stretching (the centre position of the screen is stretched less than the side).

•16:9 SQUEEZE – Selects this to display a 4:3 picture disc on a widescreen TV without stretching. Black bars will be shown on the both sides of the TV screen.

•OFF – No aspect ratio adjustment is made when this option is selected.

Note

•The WIDE SCREEN FORMAT feature will be disabled if your HDMI TV has been preset to the 480P or 576P settings.

6

English

39