Marantz NR1501 manual Basic Operation, English, Names And, Functions, Connections, Advanced, Setup

ENGLISH

SELECTING AN INPUT SOURCE

Before you can listen to any input media, you must first select the input source on the unit.

Example : DVD

ADJUSTING THE MAIN VOLUME	ADJUSTING THE TONE (BASS & TREBLE)
	CONTROL

BASIC OPERATION

TEMPORARILY TURNING OFF THE SOUND

NAMES AND	FUNCTIONS
BASIC	CONNECTIONS

To select DVD, turn the INPUT SELECTOR knob on the front panel or press the DVD button on the remote controller two times in a row. After you have selected DVD, simply turn on the DVD player and play the DVD.

•As the input source is changed, the input name will appear in the display, on the front-panel.

•If you use the FUNCTION RENAME feature (see page 20) , the renamed name appears on the display.

•As the input is changed, this unit will automatically switch to the digital input and surround mode, which were entered during the configuration process for that source.

Adjust the volume to a comfortable level using the VOLUME control knob on the front panel or VOLUME + / – buttons on the remote controller.

To increase the volume, turn the VOLUME knob clockwise or press VOLUME + button on the remote controller, to decrease the volume, turn counterclockwise or press VOLUME – button on the remote controller.

Note

•If the channel level has been set to +1 dB or more using the CHANNEL LEVEL setting, the maximum volume level will be reduced to below 80. (See page 24.)

During a listening session you may wish to adjust the Bass and Treble Control to suit your listening tastes or room acoustics.

(Using the remote controller)

To adjust the tone, press the AMP button.

To adjust the bass effect, press BASS + or BASS

–button.

To adjust the treble effect, TREBLE + or TREBLE

–button.

Notes

The tone control functions cannot be used in the modes given below.

•SOURCE DIRECT mode

•When the ROOM EQ function is used

To temporarily silence all speaker outputs such as when interrupted by a phone call, press the MUTE button on the remote controller.

This will interrupt the output to all speakers and the head-phone jack, but it will not affect any recording or dubbing that may be in progress.

When the system is muted, the display will show “MUTE” .

Press the MUTE button again to return to normal operation.

BASIC	OPERATION
ADVANCED	CONNECTIONS
SETUP
ADVANCED	OPERATION
TROUBLESHOOTING
OTHERS

13