USAGE OF REMOTE CONTROLLER
LOADING BATTERIES
Before using the remote controller for the first time, load the batteries in the remote controller. The batteries provided are used to verify the operations of the remote controller only.
1. Remove the battery cover.
2. Paying close attention to polarity indicators (ª plus and · minus), be sure to insert batteries correctly and as indicated.
3. Return the battery cover to its original position.
1 2
3 
CAUTIONS ON HANDLING BATTERIES
Misusing batteries can lead to fire, injury or soiling of surrounding area as a result of leakage, rupture or corrosion.
Carefully read the following precautions before using batteries.
•Insert the batteries while ensuring that their ª and · poles are properly aligned with the corresponding markings on the remote controller.
•Batteries of the same size and shape may have different voltages. Do not use any battery except the type indicated. Do not use old and new batteries together, and do not use different types of batteries together.
•Do not recharge batteries.
•Keep batteries out of the reach of children. Seek medical attention if accidentally ingested.
•Do not carry or store batteries together with metal ball point pens, necklaces, coins, hair pins, etc.
•If you will not be using the remote controller for an extended time (1 month or more), remove the batteries to prevent leakage. If batteries leak, do not touch the fluid with bare hands. Wipe away any fluid in the case and put in new batteries. When doing so, handle with care, because fluid on skin or clothing presents a burn risk. If you accidentally get fluid on your skin, immediately wash with water and seek medical attention.
•Do not heat or take apart batteries or put them in flame or water.
•When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country or area.
•Do not expose the batteries to excessive heat such as direct sunlight, fire or the like.
OPERATIONAL RANGE
Operate the unit with the remote controller within the range of the illustration below.
Approx. 5m (16.4 ft)
Caution
•Do not allow direct sunlight, an inverter fluorescent light or other strong source of light to shine onto the player’s infrared receptor window. Otherwise, the operation of the remote controller may be disabled.
•Bear in mind that operating the remote controller may cause other devices operated by infrared rays to be operated by mistake.
•The remote controller cannot be operated if the space between the controller and the player’s infrared receptor window is obstructed.
•Do not place any objects on top of the remote controller.
Doing so may cause one or more buttons to be held down which will cause the batteries to run down.
ENGLISH
BEFORE USE | FUNCTIONS |
NAMESAND | |
BASIC | CONNECTIONS |
BASIC | OPERATION |
ADVANCED | CONNECTIONS |
SETUP | |
ADVANCED | OPERATION |
TROUBLESHOOTING | |
OTHERS | |
3
