ENGLISH
SPEAKER DISTANCE
SPEAKER DISTANCE
>UNIT |
|
| : METERS | ||
FRONT LEFT : 10 . 0ft | |||||
CENTER |
| : | 10 | . 0ft | |
FRONT RIGHT: 10 . 0ft | |||||
SURR | RIGHT : 10 . 0ft | ||||
SURR . B | R | : | 10 | . 0ft | |
SURR . B | L | : | 10 | . 0ft | |
SURR | LEFT | : | 10 | . 0ft | |
SUBWOOFER | : | 10 | . 0ft | ||
RETURN | TO | SETUP | MENU | ||
The distances from the listening position to each speaker are set by following the steps below. The delay time will be calculated automatically based on these distances.
First, determine the ideal position where you usually sit in the listening room.
This is an important step for setting the acoustic timing that creates the best available sound field.
Note
•If NO has been set on the SPEAKER CONFIG menu for a speaker, that speaker cannot be set on the SPEAKER DISTANCE menu.
1. Press the 1/2 cursor buttons to set UNIT (display unit) to meters or feet.
2. Press the 3/4 cursor buttons to select channels.
3. Press the 1/2 cursor buttons to set the distances to the speakers.
FRONT LEFT:
Set here the distance from the regular listening position to the front left speaker.
CENTER:
Set here the distance from the regular listening position to the center speaker.
FRONT RIGHT:
Set here the distance from the regular listening position to the front right speaker.
SURR RIGHT:
Set here the distance from the regular listening position to the surround right speaker.
SURR. B R:
Set here the distance from the regular listening position to the surround back right speaker.
SURR. B L:
Set here the distance from the regular listening position to the surround back left speaker.
SURR LEFT:
Set here the distance from the regular listening position to the surround left speaker.
SUBWOOFER:
Set the distance from the subwoofer to your normal listening position.
Notes
•The distances to the speakers are set in meters (METER) or feet (FEET) as below.
•METERS:
The distances can be set in
•FEET:
The distances can be set in
(These distances are displayed in their approximate value on the monitor.)
•The speaker that has been set to NO is not displayed on the SPEAKER DISTANCE menu.
•If 2CH was selected as the surround back speaker setting on the SPEAKER CONFIG menu, the SURR.B L and SURR.B R settings are displayed.
•The SURR.BACK setting is displayed if YES was selected as the surround back speaker setting on the SPEAKER CONFIG menu.
4. When all the settings have been completed, press the 3/4 cursor buttons to move the cursor to RETURN TO SETUP MENU, and press the ENTER button to return to the menu (SPEAKER/R.EQ SETUP).
SPEAKER X-OVER
SPEAKER | X - OVER |
>FRONT | :FULL RANGE |
CENTER | :70Hz |
SURROUND | :70Hz |
SURR . B | :70Hz |
RETURN TO SETUP MENU
When the subwoofer is to be used, the speaker's cutoff frequency can be selected. The crossover frequency levels are selected in accordance with the sizes of the speakers by following the steps below.
The bass components below the frequency set here will be output from the subwoofer.
Sound in all frequency bands will be output from speakers with the FULL RANGE setting.
1. Press the 3/4 cursor buttons to select the channels.
2. Press the 1/2 cursor buttons to set the crossover frequencies.
Notes
•No setting on the SPEAKER
•If settings other than FULL RANGE have been selected for the front speakers while NO was set for the subwoofer on the SPEAKER CONFIG menu, ON will be automatically selected as the subwoofer setting on the SPEAKER CONFIG menu.
3. When all the settings have been completed, press the 3/4 cursor buttons to move the cursor to RETURN TO SETUP MENU, and press the ENTER button to return to the menu (SPEAKER/R.EQ SETUP).
SETUP
ROOM EQ CONFIG
In order for the acoustic characteristics of the listening room measured at the AUTO SETUP stage to be adjusted to achieve the optimum environment, the frequency characteristics of all the speakers are compensated for by following the steps below.
ROOM EQ CONFIG
>MODE : OFF
RETURN TO MAIN MENU
1. Press the 1/2 cursor buttons to set the mode.
MODE
ON:
The frequency characteristics are compensated for.
OFF:
The frequency characteristics are not compensated for.
2. When all the settings have been completed, press the 3/4 cursor buttons to move the cursor to RETURN TO MAIN MENU, and press the ENTER button to return to the menu (SPEAKER/R.EQ SETUP).
NAMES AND | FUNCTIONS |
BASIC | CONNECTIONS |
BASIC | OPERATION |
ADVANCED | CONNECTIONS |
SETUP | |
ADVANCED | OPERATION |
TROUBLESHOOTING | |
OTHERS | |
23
