Marantz RC1200 manual Programming the JOG Dial

PROGRAMMING THE JOG DIAL

Let’s use the example of setting as the SIDE-B code for the laser disc player.

1.Use a ballpoint pen or other sharp point to press the MODE button z until the LEARN indicator is displayed and starts to blink.

2.Place the laser disc’s remote controller so that its infrared transmitter window is facing the infrared signal receiver window on the Marantz remote controller at a distance of about 5 centimeters (2 inches).

3.Press the LD Function button ,.

4.Rotate the Jog Dial m left or right until is displayed, then press and release the ENT button n.

•The LEARN and NAME indicators will both be displayed.

5.Press the SIDE-Bbutton on the laser disc’s remote controller continuously until OK is displayed on the Marantz remote controller’s LCD, indicating that the programming has been completed.

•If AGAIN appears on the LCD, some error has prevented the command from being learned. If this happens, simply repeat the procedure from step 3.

When the programming has been completed, the remote controller automatically switches to the NAME

mode.

The left hand position on the LCD B blinks, indicating the character in the name to be rewritten.

ENGLISH

13