ENGLISH
LCD (Liquid Crystal Display)
Information about currently selected functions and modes is displayed on the LCD. Pressing any buttons will call up a full display of information on the status of that function or mode. This display will disappear after approximately 1 minute, except for the Function Name indicator A, which is always displayed.
A
B
I
J
C
E
D
H
FG
AFunction Name indicator
Displays the name of the currently selected function (LD, TV, etc.) using up to 5 characters.
BCommand Name
indicator
Displays up to 10 types of commands for each function using up to 5 characters.
CCommand Page indicator
Allows confirmation of current command page of Jog Dial m. Also, when setting or transmitting macros, displays information such as the number of macro steps and the time intervals between command transmissions.
DTransmission indicator
Indicates when the remote controller is transmitting a signal.
EUSE indicator
Indicates the status in which the programmed code is output.For normal operation the USE indicator is displayed.
FLEARN indicator
Indicates when the remote controller is in the LEARN mode . It also appears when programming is cleared.
6
