ENGLISH
,Function buttons
Used to switch the remote controller to the command sets for specific sources (amplifier, receiver, etc.), thereby allowing a single remote controller to control up to 11 different components. To use these buttons to switch the amplifier’s source, press the desired button twice within 2 seconds. The AMP button , is used only to switch the command set of the remote controller itself and therefore does not transmit any signal. Further, the function buttons may also be programmed to execute macros. (A macro allows a complex string of operations to be performed in series simply by pressing a single button.) One button can be programmed to learn sequences containing up to 10 commands. The following is an example of a macro sequence:
Turn the receiver ON → Switch the function to DVD → Set the Surround Mode to Dolby Digital → Switch the TV to video input → Set the DVD player to Play.
.VOLUME 
up / 
down
button
Used to adjust the volume on receivers and other components equipped with volume control.
⁄0CURSOR/CONTROL buttons
Used to operate
⁄1< • 3 (CURSOR/ CONTROL switching) button
Used to switch the function of the CURSOR/ TRANSPORT CONTROL buttons ⁄0between CURSOR and TRANSPORT CONTROL, with the currently selected function displayed on the LCD when the DVD, LD, or VCR functions are selected. When functions other than DVD, LD, or VCR are selected, the < • 3 button remains inactive.
⁄2Channel 
up / 
down button
Used to controls the up/down function of TV tuner, or allows one to cycle through the tuner presets.
⁄3MUTE button
Used to temporarily mute the sound for preamplifiers, receivers, etc.
4
