Marantz RC1200 manual Erasing by Buttons, English

POWER

SOURCE

ON ON / OFF OFF

LEARNING REMOTE

CONTROL RC 1200 MACRO MODE

2.Erasing by Button(s)

T o c l e a r t h e c o d e s a n d n a m e s programmed in any of the buttons

•Press the button concerned twice while holding down the CLEAR button ⁄5.

ENGLISH

When the codes are cleared, the button returns to its factory presets or it is left empty.

Jog Dial codes can be cleared in the same way: turn the Jog Dial to call up the name of the command whose codes are to be erased, and press the ENT button n (either the left one or the right one) twice while holding down the CLEAR button ⁄5, and the c o d e s a n d c o m m a n d n a m e s memorized in the button will be cleared.

When the codes are cleared, the button returns to its factory presets or it is left empty.

•To erase codes programmed for the CLEAR button ⁄5, simply press the CLEAR button ⁄5continuously for 3 seconds.

As an example, let’s clear the PLAY command from the laser disc player command set.

1.While holding down the CLEAR button ⁄5:

w	CH	OK		VOL
	C D	DVD		CD-R/MD
	DSS	T V	VCR	AUX
	L D	TUNER	TAPE	AMP
q	CLEAR	MEMO	GUIDE MUTE
	AUTO	DOLBY THX	DTS	HALL

1 2 3 4 5

2.Press the OK Cursor button ⁄0twice.

17