ENGLISH
7.Follow the same procedure to enter “D- A”. When finished, press the OK Cursor button ⁄0. Pressing OK permanently fixes the newly written characters.
Similarly, the function names can be overwritten by pressing the function buttons.
•Up to 5 characters can be entered in the function display and command display.
•To rewrite the names of the other items
in the Command Name indicator, use the Jog Dial m to select the desired command and repeat from step 5.
8.When you are finished rewriting, use a ballpoint pen or other sharp point to press the MODE button z to return the remote controller to the USE mode. The USE indicator is displayed on the LCD, and the newly programmed codes now can be used.
POWER
SOURCE
ON ON / OFF OFF
LEARNING REMOTE
CONTROL RC 1200 MACRO MODE
ERASING PROGRAMMED CODES
(Returning to Factory Presets)
Codes that have been programmed into the memory can be erased in 4 ways: by button(s), by function(s), by Jog Dial command, and by erasing all memory contents.
1.Use a ballpoint pen or other sharp point to press the MODE button z to switch the remote controller to the LEARN mode, so that the LEARN indicator is blinking on the LCD.
Note:
Erasing of programmed codes is only possible in the LEARN mode.
16
