ENGLISH
MACRO: Adjusts the time interval between transmissions of macro operations
When the v Cursor button ⁄0is pressed, LCD
adisplays MACRO, while LCD b displays
STEP.
One square (7) in LCD c is equivalent to an interval of 0.5 seconds, allowing intervals of up to 5 seconds to be set. The remote controller is set at the factory with an interval of 1 second, as indicated by (77&&&&&&&&). Adjust the interval between transmission of operation codes using the < and > Cursor buttons ⁄0, then press the OK Cursor button ⁄0.
•To cancel the setting, press any button other than the Cursor button ⁄0.
LIGHT: Adjusts the LCD display lighting duration.
When the ^ or v Cursor button ⁄0is pressed, TIME appears at LCD B. Every 7 at LCD C represents a second, and a lighting duration of up to 10 seconds can be set.
The unit is set at the factory with a duration of 5 seconds (77777&&&&&). When 0 is set, only the LIGHTING button ⁄9can be used to light up the LCD display: no other buttons can be used to perform this operation.
Press the < Cursor button ⁄0to decrease the lighting duration; conversely, press the > button to increase it.
•After setting the duration, press the OK Cursor button ⁄0.
•To cancel the setting, press any button except the Cursor button ⁄0.
•To continue with the setting, press the ^ or v Cursor button ⁄0.
38
