D2 I-TIME:
This is used when setting the transmission interval (interval time) for macro programs. It can be set from 0.5 to 5 seconds and is set using the cursor buttons.
D3 CONT:
This is used to change the contrast of the LCD. It can be adjusted to one of 10 levels and is set using the cursor buttons.
D4 CLOCK:
This is used to set the current time.
PAGE3 TIMER
The macro timer setting is performed from this menu.
D1 DAILY?:
This is for using the timer function to execute a macro. Use DAILY when a program will be executed at the same time each day.
D2 ONCE?:
This is for using the timer function to execute a macro. Use ONCE when a program will be executed only once.
D5 CANCEL:
This is for using the setting time to cancel.
PAGE4 CLONE
The Clone mode settings are made from this menu.
D1 RX:
This is used on the receiving unit (slave) when copying all of the programmed information from another RC1400 remote control.
D2 RX-S:
This is used on the receiving unit (slave) when copying the programmed information for selected source from another RC1400 remote control.
D3 TX:
This is used on the sending unit (master) when copying information to another RC1400 remote control.
ENGLISH
9
RC1400N 01 ENG | Page 9 | 03.10.6, 4:17 PM Adobe PageMaker 6.5J/PPC |
