Marantz RC1400 manual Setup, Setting the Lighting Time

SETUP

Setting the Lighting Time

•The LCD lights up when the LIGHT buttons !5are pressed. The LCD remains lit while the pressed button is held down, and it goes off when the button is released.

•The LCD continues to light up if another button is pressed while it is lit or if pressed within two seconds after the light goes off.

•The lighting time can be set in one-second units from 0 to 60 seconds.

The LIGHT buttons have light-absorbing properties that enable them to store light. If the buttons are no longer illuminated in a dimly lit environment, bring the buttons near a fluorescent lamp or other light source for a sufficient amount of time. This should illuminate the buttons again.

•The LIGHT buttons consist of a LIGHT1 and LIGHT2 button, and they both perform the same operation.

The factory default lighting time is set to 15 seconds.

This example shows how to set the lighting time to 20 seconds.

2 3 4

ENGLISH

PAGE 1 2

LEARN

1 2 3 4

LEARN

1 2 3 4

1Hold down the M button r for three seconds or more.

The menu is displayed.

2Press the > button y to display the second page SETUP menu.

3Press the D1 (LIGHT) direct button t.

The LIGHT is displayed on the LCD

4 Press the or cursor button @0to set the lighting time.

5Press the OK cursor button @0to enter the lighting time.

6Once the setting is finished, press the M button r.

41

RC1400N 01 ENG Page 41 03.10.6, 4:19 PM Adobe PageMaker 6.5J/PPC