ENGLISH
9Confirm the OK is displayed and then the display returns to the Preset Setting (P- SET).
10To set the manufacturer number for another source device, repeat the procedure in steps 4 to 8.
11After the settings are completed, press the M button r.
12Press the buttons on the remote control to check that the DVD can be operated correctly.
Check the following points if the equipment which was set does not operate properly.
•If there is more than one number in the manufacturer number list, try setting a different number.
•There may be some buttons which cannot be used. Program the codes to the required buttons.
LEARN Mode
Programming the (PLAY) and Other Control Buttons and Numeric Buttons
This remote control is capable of learning and storing codes used by other remote controls that you already own.
For codes which are not learned, the remote control will transmit either the Marantz preset codes from the initial settings, or remote codes from another manufacturer’s AV equipment which is set by the customer.
The receiver sensor for the remote control signals is located at the top of the remote control.
This example shows how to learn the codes from the remote control of a DVD player.
1 |
|
| 2 | 4 |
| |
|
|
| LEARN |
| LEARN |
|
| USEPAGE 1 |
| 1 2 |
| 1 2 |
|
|
|
|
|
|
|
|
6 | (When OK) | (failed) | (codes are full) | |||
LEARN
PAGE 1 2
LEARN
PAGE 1 2
18
1 2
RC1400N 01 ENG | Page 18 | 03.10.6, 4:17 PM Adobe PageMaker 6.5J/PPC |
