ENGLISH
If FULL is displayed no matter how many times you try the learning operation, the remote control cannot accept any more new codes until some of the previously learned codes are deleted from the memory. Delete some of the learned buttons from the sources.
The M button r and > button y cannot be taught. Only each one code can be learned for the LIGHT buttons 1 and 2 !5, regardless of the source.
Programming the Direct Buttons and Rewriting Names
This example shows how to program codes from other manufacturer products to the DVD MENU button (D1) and change the display to OSD.
6 | 7 | 8 |
LEARN
PAGE 1 2
LEARN
PAGE 1 2
LEARN
PAGE 1 2
1Hold down the M button r for three seconds or more.
The menu is displayed.
2Press the D2 (LEARN) direct button t.
The LEARN setting (LEARN) indicator is displayed. The LEARN indicator then blinks.
3Press the DVD source button !4.
The first page of the direct button screen is displayed.
There are four available pages. Pressing the > buttons cycles through the pages in this order 1 → 2 → 3 → 4 → 1.
4Press the D1 (MENU) direct button t.
The LEARN indicator blinks, and then displays to indicate that learning is ready.
5Place the receiver sensor of the remote control (top) so that it is facing the transmitter of the DVD remote control (top) at a distance of about 5 cm (2 inches).
6Press and hold down the OSD button of the transmitting DVD remote control, and check that OK is displayed on the LCD.
The remote control has finished learning when OK is displayed on the LCD.
20
RC1400N 01 ENG | Page 20 | 03.10.6, 4:17 PM Adobe PageMaker 6.5J/PPC |
