
iMUTE button
This button is used to mute the audio for the amplifier and television.
oGUIDE button
This button is used to display the menus for the DVD player, DSS (satellite broadcasting tuner), or other AV equipment.
!0EXIT button
This button is used to cancel settings in the menu or program.
!1Numeric buttons
These buttons are used to switch between 0 to 9 of the source components. If the source is set to the amplifier, these buttons are used to perform operations corresponding to those shown on the text plate.
!2MEMO button
This button is used to store settings to memory or program a source.
!3CONTROL button
These buttons are used when operating the PLAY, STOP, PAUSE, and other commands of a source.
!4SOURCE button
These buttons are used to switch the source of your A/V Receiver / amplifier. Each time a source button is pressed, the remote control changes to the source which was pressed.
This remote control can control 12 types of equipment. To change the A/V Receiver / amplifier source, press this button twice within two seconds. The signal is sent when it is pressed the second time.
!5LIGHT 1 and 2 buttons
Pressing these buttons will light up the LCD and its buttons. This lighting time can be set. If the lighting time is set to 0 seconds, the backlight turns on only while this button is pressed. The operations for LIGHT 1 and 2 are identical.
!6CLEAR button
This button is used to erase the memory or program of a source.
!7MENU button
This button is used to display the OSD menu of an amplifier or other source.
!8PREV (Previous) button
This button is used to return to the previous channel on the television or other device.
5
ENGLISH
RC1400N 01 ENG | Page 5 | 03.10.6, 4:17 PM Adobe PageMaker 6.5J/PPC |