If ERROR is displayed on the LCD, some error has prevented the command from being learned. If this happens, repeat the procedure for steps 4 and 5.
•After learning is completed, the remote control automatically switches to name rewriting mode. The left end “ ” indicator on the MENU blinks to indicate that the blinking part can be rewritten.
•If no names will be rewritten, press the OK cursor button. The display returns to learning standby mode by pressing the OK cursor button.
7 To change the name, press the numeric buttons !1to enter the text.
• Use the cursor buttons to move to the sections to be rewritten on the LCD.
•To change MENU to OSD, press the 5 numeric button !1.
Each time the button is pressed, the display cycles through M → N → O → 5 → M.
8After rewriting of the text is completed, press the OK cursor button @0.
To delete text that is already entered, press the 0 button to insert a space.
•In this example, MENU is changed to “OSD (space) (space)” in this step, and then OSD is displayed in the right side by pressing the OK button.
For details, refer to the section “Rewriting Names”.
9In the same way, use the > button y to select the page, and then press the direct button t to program the codes.
10After programming the codes for each of the buttons, press the M button r.
The USE indicator displays on the LCD, and the newly stored codes can be transmitted.
ENGLISH
21
RC1400N 01 ENG | Page 21 | 03.10.6, 4:17 PM Adobe PageMaker 6.5J/PPC |
