ENGLISH

BASIC OPERATION

USE Mode

(Normal operation status)

This remote control is preset with a total of 12 types of remote codes, including Marantz TV (television), DVD, VCR (VCR deck), DSS (satellite broadcasting tuner), TUNER, CD, CD-R, MD, TAPE (tape deck), AUX1, AUX2, and AMP (amplifier).

Learning is not necessary for Marantz products. You can use these products without setting any codes.

1Press the SOURCE button !4.

For this example, press DVD.

DVD is shown on the LCD, and the remote control is set for DVD.

Pressing the source button once changes the remote control to the settings for the source that was pressed. To change the amplifier or other source, press the SOURCE button twice (double-click). The code is sent, and then the amplifier source changes to DVD.

2Press the buttons to operate the DVD.

The indicator is shown on the LCD while the

remote control codes are being transmitted. It is not displayed when buttons without stored code are pressed.

3The direct buttons t can be used to perform up to 20 operations for each of the 12 sources, including DVD, TV, AMP, and other AV equipment.

The buttons consist of the D1 to D5 buttons, and the equipment is operated by pressing the buttons corresponding to the indicators on the LCD.

Four pages are available, and press the > button to select a page. The current page position is displayed on the LCD.

14

RC1400N 01 ENG

Page 14

03.10.6, 4:17 PM Adobe PageMaker 6.5J/PPC

Page 16
Image 16
Marantz RC1400 manual Basic Operation, USE Mode, Normal operation status, Press the buttons to operate the DVD