Marantz RC1400 manual Setting the Macro Interval Time

ENGLISH

Setting the Macro Interval Time

When a macro program is executed, control signals are transmitted in sequence. This transmission interval (interval time) can be set in 0.5-seconds units from 0.5 to 5 seconds.

If the interval time is set in this Setup mode, the interval times for all programmed macros are changed. If necessary, use EDIT (see page

33)in the macro program to change the individual transmission times.

The factory default setting for the transmission interval is 1 second.

This example shows how to set the interval time to 5 seconds.

2 3 4

PAGE 1 2

LEARN

1 2 3 4

LEARN

1 2 3 4

1Hold down the M button r for three seconds or more.

The menu is displayed.

2Press the > button y to display the second page SETUP menu.

3Press the D2 (I-TIME) direct button t.

4 Press the or cursor button @0to set the interval time.

Holding down the cursor button fast-forwards the

time indicator.

5Press the OK cursor button @0to enter the interval time.

6Once the setting is finished, press the M button r.

42

RC1400N 01 ENG Page 42 03.10.6, 4:19 PM Adobe PageMaker 6.5J/PPC