Matrox Electronic Systems 10760-101-0200 manual Connecting external devices

Connecting external devices 19

Connecting external devices

Matrox Meteor-II /Camera Link for PCI

Matrox Meteor-II /Camera Link for PCI has five connectors, which are indicated in the diagram below. All these connectors are discussed in detail in Appendix B.

•Two Camera Link interface connectors (video input connectors). Each connector is used to send camera control signals, receive video data and synchronization signals, and send/receive serial communication signals.

•Trigger input connector. Used for TTL, LVDS, or opto-isolated trigger input.

•Auxiliary sync and control connector. Used to send synchronization signals, as well as send and receive control signals.

•VMChannel. Used to send data to another Matrox board.

VMChannel

Auxiliary

I/O connector

Camera Link

connectors

Auxiliary sync and

control connector

Trigger input

connector