24 Chapter 3: Installing software
Installing the software
To install any Matrox Imaging software, place its CD in the appropriate drive; the
setup.exe file will run automatically.
While installing the software, you will be asked to provide the following
information:
• The drive and directory in which to install the software.
• The target operating system and compiler.
• The type of Matrox hardware that is installed in your computer.
! If you have an M GA graphics b oard, you shou ld install th e display dri ver that is
on the CD.
After installation, read the readme file(s) recommended by the installation
program.
Note about Matrox Intellicam
MIL-Lite uses digitizer configuration formats (DCFs) to configure the camera
interface on Matrox digitizers. The DCF defines, among other things, the video
timing signals and the video data format. Matrox Intellicam can be used to create
or customize a DCF file, if the supplied files do not include one that matches your
video source.
For more information about Matrox Intellicam, refer to the Matrox Intellicam User
Guide.