What you need to get started 11
What you need to get started
To begin using Matrox Meteor-II /Camera Link, you need the following:
•A computer with a PCI bus and an Intel Pentium processor (or equivalent) or better.
•Microsoft Windows if using Matrox Imaging software (consult the Matrox Imaging software package for specific supported environments and computer memory/storage requirements).
•A computer with a relatively up-to-date PCI chipset, such as the Intel 440BX, 810, 815E, 820, 840, or 850 for full Matrox Meteor-II functionality. These chipsets are recommended because they generally offer better performance in terms of data transfer rates.
•A computer with an empty 32-bit PCI expansion slot (bus-master capable).
•A CD drive, and a hard disk or network drive on which to install the Matrox Meteor-II software.
Inspecting the Matrox Meteor-II /Camera Link package
When you unpack your Matrox Meteor-II /Camera Link package, you should check its contents. Note that optional parts might or might not be included, depending on what you ordered. If something is missing or damaged, contact your Matrox representative.
Standard package
If you ordered Matrox Meteor-II /Camera Link, you should receive the following items:
•The Matrox Meteor-II /Camera Link board, the expanded I/O adapter bracket (with the trigger input and auxiliary sync and control connectors), and the flat ribbon cable.
•The Matrox Meteor-II /Camera Link Installation and Hardware Reference manual (this document).