Mazda Mazda2_8BL3-EA-10E_Edition3 manual Turning Off the Engine

Driving Your Mazda

Starting and Driving

6.After starting the engine, let it idle for about 10 seconds.

NOTE

lIn extremely cold weather or after the vehicle has not been driven in several days,

let the engine warm up without operating the accelerator.

lWhether the engine is cold or warm, it

should be started without use of the accelerator.

lIf the engine does not start the first time, refer to Starting a Flooded Engine under Emergency Starting. If the engine still does not start, have your vehicle inspected by an Authorized Mazda Dealer (page 7-17).

Turning Off the Engine

1.Stop the vehicle completely.

2.(Manual transaxle) Shift into neutral. (Automatic transaxle)

Shift the shift lever to the P position.

3.Turn the ignition switch from the ON to the OFF/LOCK position.

WARNING

Do not stop the engine while the vehicle is moving:

Stopping the engine while the vehicle is moving for any reason other than in an emergency is dangerous. Stopping the engine while the vehicle is moving will result in reduced maneuverability and braking ability due to the loss of power steering and power braking, which could cause an accident and serious injury.

CAUTION

When leaving the vehicle, make sure the ignition is switched OFF.

5-4