Mazda Mazda2_8BL3-EA-10E_Edition3 manual Tether strap Forward

Essential Safety Equipment

Child Restraint

qLATCH Child-Restraint System

Installation Procedure (Rear

Outboard Seats)

1.Make sure the seatback is securely latched by pushing it back until it is fully locked.

2.Expand the area between the seat bottom and the seatback slightly to verify the locations of the LATCH lower anchors.

NOTE

The markings above the LATCH lower anchors indicate the locations of LATCH lower anchors for the attachment of a child-restraint system.

3.Raise the head restraint to the top locked position.

Refer to Head Restraints on page 2-7.

4.Secure the child-restraint system using BOTH LATCH lower anchors, following the child-restraint system manufacturer's instruction. Pull on the child-restraint to be sure both anchors are engaged.

5.If your child-restraint system came equipped with a tether, that means it is very important to properly secure the tether for child safety. Please carefully follow the child-restraint system manufacturer's instructions when installing tethers.

Anchor bracket location

Tether strap position

Tether strap

Forward

2-33