Mazda Mazda2_8BL3-EA-10E_Edition3 manual Jack head

In Case of an Emergency

Flat Tire

2.Loosen the lug nuts by turning them counterclockwise one turn each, but do not remove any lug nuts until the tire has been raised off the ground.

3.Place the jack on the ground.

4.Turn the jack screw in the direction shown in the figure and adjust the jack head so that it is close to the jack-up position.

Jack head

5.Place the jack under the jack-up position closest to the tire being changed with the jack head squarely under the jack-up point.

Jacking position

6.Continue raising the jack head gradually by rotating the screw with your hand until the jack head is inserted into the jack-up position.

Tire blocks

Jacking position

7-8