Mazda Mazda2_8BL3-EA-10E_Edition3 manual Head Restraints

Models: Mazda2_8BL3-EA-10E_Edition3

1 340
Download 340 pages 56.3 Kb
Page 19
Image 19

Essential Safety Equipment

Seats

1.Verify that the seat belt is secured in the belt clip.

Belt clip

2.Lift the seatbacks upright.

3.Make sure that the seat belt is neither stuck in the rear seat nor twisted, then remove the seat belt from the belt clip.

Head Restraints

Your vehicle is equipped with head restraints on all outboard seats. The head restraints are intended to help protect you and the passengers from neck injury.

WARNING

Always drive with the head restraints installed when seats are being used and make sure they are properly adjusted:

Driving with the head restraints adjusted too low or removed is dangerous. With no support behind your head, your neck could be seriously injured in a collision.

Height adjustment

To raise a head restraint, pull it up to the desired position.

To lower the head restraint, press the stop- catch release, then push the head restraint down.

Adjust the head restraint so that the top is even with the top of the passenger's ears, never the passenger's neck to prevent injury.

Front outboard seat

2-7

Page 19
Image 19
Mazda Mazda2_8BL3-EA-10E_Edition3 manual Head Restraints