![](/images/new-backgrounds/1138932/138932345x1.webp)
Interior Comfort
Climate Control System
WARNING
Do not use the position in cold or rainy weather:
Using the position in cold or rainy weather is dangerous as it will cause the windows to fog up. Your vision will be hampered, which could lead to a serious accident.
qHeating
1.Set the mode selector dial to the position.
2.Set the air intake selector to the position.
3.Set the temperature control dial to the hot position.
4.Set the fan control dial to the desired speed.
5.If dehumidified heating is desired, turn on the air conditioner.
NOTE
lIf the windshield fogs up easily, set the mode selector dial to the position.
lIf cooler air is desired at face level, set the
mode selector dial at the position and adjust the temperature control dial to
maintain maximum comfort.
lThe air to the floor is warmer than air to the face (except when the temperature control dial is set at the extreme hot or cold position).
qCooling (With Air Conditioner)í
1.Set the mode selector dial to the position.
2.Set the temperature control dial to the cold position.
3.Set the fan control dial to the desired speed.
4.Turn on the air conditioner by pressing the A/C switch.
5.Adjust the fan control dial and temperature control dial to maintain maximum comfort.
CAUTION
If the air conditioner is used while driving up long hills or in heavy traffic, monitor the engine coolant temperature warning light to see if it is illuminated or flashing (page
NOTE
lWhen maximum cooling is desired, set the temperature control dial to the extreme cold position and set the air intake selector to
the position, then set the fan control
dial to position 4.
lIf warmer air is desired at floor level, set
the mode selector dial at the position and adjust the temperature control dial to
maintain maximum comfort.
lThe air to the floor is warmer than air to the face (except when the temperature control dial is set at the extreme hot or cold position).
qVentilation
1.Set the mode selector dial to the position.
2.Set the air intake selector to the position.
3.Set the temperature control dial to the desired position.
íSome models. |