Mazda Mazda2_8BL3-EA-10E_Edition3 manual QEngine Oil Pressure Warning Light, QCheck Engine Light

Driving Your Mazda

Warning/Indicator Lights and Beep Sounds

qEngine Oil Pressure Warning Light

This warning light illuminates when the ignition is switched ON and turns off when the engine is started.

This warning light indicates low engine oil pressure.

If the light illuminates while driving:

1.Drive to the side of the road and park off the right-of-way on level ground.

2.Turn off the engine and wait 5 minutes for the oil to drain back into the oil pan.

3.Inspect the engine oil level (page 8-12). If it's low, add the appropriate amount of engine oil while being careful not to overfill.

4.Start the engine and check the warning light.

If the light remains illuminated even after you add oil, stop the engine immediately and have your vehicle towed to an Authorized Mazda Dealer.

CAUTION

Do not run the engine if the oil pressure is low. It could result in extensive engine damage.

qCheck Engine Light

This indicator light illuminates when the switch is turned and turns off when the engine is started.

If this light illuminates while driving, the vehicle may have a problem. It is important to note the driving conditions when the light illuminated and consult an Authorized Mazda Dealer.

The check engine light may illuminate in the following cases:

lThe fuel tank level being very low or

approaching empty.

lThe engine's electrical system has a

problem.

lThe emission control system has a problem.

If the check engine light remains on or flashes continuously, do not drive at high speeds and consult an Authorized Mazda Dealer as soon as possible.

5-40