![](/images/new-backgrounds/1138932/138932167x1.webp)
Knowing Your Mazda
Doors and Locks
qOperating the Driver's Side Power Window
Manual opening/closing
To open the window to the desired position, lightly hold down the switch. To close the window to the desired position, lightly pull up the switch.
Driver's window
To fully open the window automatically, press the switch completely down, then release. The window will fully open automatically.
To fully close the window automatically, pull the switch completely up, then release. The window will fully close automatically.
To stop the window partway, pull or press the switch in the opposite direction and then release it.
NOTE
If the battery was disconnected during vehicle maintenance, or for other reasons such as a switch continues to be operated after the window is fully open/close, the window will not fully open and close automatically. Carry out the following procedure to resume operation:
1.Switch the ignition ON.
2.Press the switch and fully open the window.
3.Pull up the switch to fully close the window and continue holding the switch for about 2 seconds after the window fully closes.
With the window completely closed, press the switch lightly and the window will open and stop about 3 cm (1 in) from the top.
If you continue to press and hold the switch, the window will resume opening all the way.
NOTE
lPressing the power window switch once when the window is fully closed will only open it about 3 cm (1 in) to allow
convenient ventilation of the cabin.
lThe range in which the window opens can be changed.
Refer to Personalization Features on page
lThe
Refer to Personalization Features on page
If a person's hands, head or an object blocks the window during the auto- closing operation, the window will stop and open halfway.