Mazda Mazda2_8BL3-EA-10E_Edition3 manual Than that

Interior Comfort

Climate Control System

Mode selector dial

Turn the mode selector dial to select airflow mode (page 6-4).

NOTE

lThe mode selector dial can be set at the

intermediate positions ( or ) between each mode. Set the dial to an intermediate position if you want to slightly adjust the airflow amount.

lFor example, when the mode selector dial is

at the position between the and positions, airflow from the floor vent is less

than that of the position.

lWhen the mode selector dial is in the

position, use the air intake

selector in the position (outside air

mode).

lThe indication is designed to inform

the front occupants to switch the air intake

selector lever to the position (outside air mode), while the mode selector dial is

turned to the or position, to speed defogging of the windshield.

A/C switch í

Press the A/C switch to turn the air conditioner on. The indicator light on the switch will illuminate when the fan control dial is set at position 1, 2, 3, or 4.

Press the switch once again to turn the air conditioner off.

NOTE

The air conditioner may not function when the outside temperature approaches 0 °C (32 °F).

Air intake selector

This lever controls the source of air entering the vehicle.

It is recommended that under normal conditions the lever be kept in the outside air position.

Outside air position ( )

Outside air is taken into the vehicle. Use this position for normal ventilation and heating.

Recirculated air position ( )

Outside air is shut off. Air within the vehicle is recirculated.

This position can be used when driving on a dusty road or in similar conditions. It also helps to provide quicker cooling of the interior.

6-6 íSome models.