Mazda Mazda2_8BL3-EA-10E_Edition3 manual Owner Maintenance

Maintenance and Care

Owner Maintenance

3.Disconnect the electrical connector from the bulb by pressing the tab on the connector with your finger and pulling the connector.

4.Turn the bulb assembly counterclockwise and remove it.

5.Install the new bulb in the reverse order of removal.

NOTE

lTo replace the bulb, contact an Authorized Mazda Dealer.

lIf the halogen bulb is accidentally touched,

it should be cleaned with rubbing alcohol before being used.

lUse the protective cover and carton of the replacement bulb to dispose of the old bulb promptly out of the reach of children.

Front turn signal lights

1.Make sure the ignition is switched off and the headlight switch is off.

2.Lift the hood.

3.Turn the socket and bulb assembly counterclockwise and remove it.

4.Remove the bulb by pushing it in slightly and turning it counterclockwise.

5.Install the new bulb in the reverse order of removal.

Parking lights/Front side-marker lights

1.Make sure the headlight switch is off.

2.If you are changing the right bulb, start the engine, turn the steering wheel all the way to the left, and turn off the engine. If you are changing the left bulb, turn the steering wheel to the right.

8-35