Mazda Mazda2_8BL3-EA-10E_Edition3 manual Seat Belt Warning Light/Beep, QBelt Minder

Essential Safety Equipment

Seat Belt Systems

Seat Belt Warning Light/Beep

The seat belt warning light illuminates and a beep sound will be heard if the driver's seat belt is not fastened when the ignition is switched ON.

Conditions of operation

Condition	Result
The driver's seat belt is not	The warning light
	flashes and a beep
fastened when the ignition is
switched ON.	sound will be heard
	for about 6 seconds.
The driver's seat belt is	The warning light
fastened while the warning
	turns off and the beep
light and the beep sound are
activated.	sound stops.
The driver's seat belt is	The warning light will
	not illuminate and the
fastened before the ignition
is switched ON.	beep sound will not be
	heard.

qBelt Minder

NOTE

Consult an Authorized Mazda Dealer to deactivate or restore the belt minder. Though the belt minder can be deactivated, doing so will defeat the purpose of the system to warn the driver and the front passenger in the event that their seat belts are not fastened. For the safety of the driver and front passenger, Mazda recommends not deactivating the belt minder.

Driver's seat

If the driver's seat belt is not fastened and the vehicle is driven at a speed faster than about 20 km/h (12 mph), the warning light will flash and a beep sound will be heard.

Once the beep sound is heard, it continues sounding even if the vehicle speed lowers to 20 km/h (12 mph) or less until the seat belt is fastened or the beep sound period has passed.

Front passenger seat

If the front passenger seat belt is not fastened while the ignition is switched ON, the driver and the passenger will be informed by the warning light.

2-19