Mazda Mazda2_8BL3-EA-10E_Edition3 manual QOperating the Radio

Interior Comfort

Audio System

qOperating the Radio

Display Auto memory button

Band selector button

Scan button

Tuning button Channel preset buttons

Radio ON

Press a band selector button ( ) to turn the radio on.

Band selection

Successively pressing the band selector

button ( ) switches the bands as follows: FM1→FM2→AM.

The selected mode will be indicated. If FM stereo is being received, “ST” will be displayed.

NOTE

If the FM broadcast signal becomes weak, reception automatically changes from STEREO to MONO for reduced noise, and the “ST” indicator will go out.

Tuning

The radio has the following tuning methods: Manual, Seek, Scan, Preset channel, and Auto memory tuning. The easiest way to tune stations is to set them on preset channels.

NOTE

If the power supply is interrupted (fuse blows or the battery is disconnected), the preset channels will be erased.

Manual tuning

Select the station by pressing the tuning button ( , ) lightly.

Seek tuning

Automatic search for radio stations starts when the tuning button ( , ) is pressed until a beep sound is heard. The search stops when a station is found.

6-26