Panasonic UF-890/990 appendix Loading Documents, How to Load Documents

Loading Documents

How to Load Documents

1.Be sure the document(s) is free of staples, paper clips and is not torn, greasy or covered by foreign objects.

2.Place the document(s) FACE DOWN on the Automatic Document Feeder (ADF) until the leading edge placed into the machine stops.

If you are sending multiple pages, make sure that the bottom sheet enters first. You can also stack up to 70 PAGES on the ADF at one time by setting the documents as stairs shape as the figure below. If you have more than 70 pages, wait until transmission or storing in memory starts as pages feed through, place any remaining pages on top of the last page in the feeder.

3.Adjust the Document Guides to center the document on the ADF.

Document Guides

CORRECT INCORRECT

When you set a document on the ADF, the display message will change from date and time (standby) to the following message. You can now change basic transmission settings, or begin the dialing procedure.

ENTER STATION(S)

THEN PRESS START 00%

NOTE	1 The document limitation to send multiple pages is as follows.
			Document Size	Document Thickness
		Up to 50 pages	Up to 10.1 x 14.3 in (257 x 364 mm)	0.0024 - 0.0048 in
		Up to 70 pages*	A4 or Letter size	0.0024 - 0.0039 in

*Please note that although the size and thickness meets the specifications, you might not be able to set 70 pages with some types of papers.

2.Transmitting documents longer than 14 in (356 mm) requires user's assistance.

3.When transmitting documents longer than Letter size (8.5 ⋅ 11 in), please extend the sub-tray as shown below.

Sub - Tray

Basic Operations

41