Panasonic UF-890/990 appendix Manual Number Dialing, Make sure that the Memory lamp is on

Memory Transmission

Manual Number Dialing

To dial the telephone number manually, follow the steps below.

1

Set document(s) face down.

2	MEMORY
	Make sure that the MEMORY lamp is on.
3	If not, press “On”.	MEMORY to set “On”.
	Enter a telephone number from the keypad.
	Ex: 5 5 5 1	2 3 4
4	START

Sending Documents

ENTER STATION(S)

THEN PRESS START 00%

TEL. NO. 5551234❚

* STORE * NO.002

PAGES=001 05%

Basic Operations

* DIALING * NO.002 5551234

The document is stored into memory with a file number. Then starts dialing the telephone number immediately after storing the first page. (See Note 3)

The remaining page(s) continue to store into memory.

NOTE	1.	If you need a special access number to get an outside line, dial it first then press		to
			PAUSE
		enter a pause (represented by a "-") before dialing the full number.
		Ex: 9 PAUSE 5551234
	2.	If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing,

press TONE (represented by a "/").

The dialing mode will be changed from Pulse to Tone after dialing the digit "/".

Ex: 9 PAUSE TONE 5551234

3.This feature is called “Quick Memory Transmission”. If you wish to store all the document(s) into memory first before transmitting, change the Fax Parameter No. 82 (QUICK MEMORY XMT) to “ Invalid”. (See page 39)

47