Panasonic UF-890/990 appendix Manual Number Dialing Direct Transmission

Sending Documents

Direct Transmission

If your machine's memory is full or you wish to send the document immediately, use Direct Transmission.

Manual Number Dialing (Direct Transmission)

To dial the telephone number manually, follow the steps below.

1

2

3

4

Set document(s) face down.

MEMORY

Make sure that the lamp goes off.

Enter a telephone number from the keypad.

Ex: 5 5 5 1 2 3 4

START

Your machine starts to dial the telephone number.

ENTER STATION(S) THEN PRESS START 00%

ENTER STATION

00%

PRESS START TO DIAL 5551234❚

* DIALING * 5551234

NOTE

1.	If you need a special access number to get an outside line, dial it first then press					PAUSE	to
	enter a pause (represented by a "-") before dialing the full number.
	Ex: 9 PAUSE 5551234
2.	If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing,
	press		(represented by a "/").
		TONE
	The dialing mode will be changed from Pulse to Tone after dialing the digit "/".
	Ex: 9 PAUSE TONE 5551234
3.	To stop the transmission, press				.
				STOP
	The display shows:
	COMMUNICATION STOP?
	1:YES 2:NO
	Press	1 to stop the transmission. The Communication Journal will not print out regardless of

the printout mode setting of the Communication Journal.

52