Panasonic UF-890/990 appendix Setting the Access Code

Access Code

General Description

The Access Code prevents an unauthorized user from operating the machine. Once a 4-digit Access Code is registered, no one can operate the machine without entering the correct access code.

Automatic Receiving, however, is always available. After you complete any operation, such as mode setting or transmission, and the display returns to standby, you have to re-enter the access code in order to use the machine again. Registering the Access Code does not affect the use of the machine in any other way.

Setting the Access Code

1 FUNCTION 7

2 4 SET

3 3 8 SET

4	Enter a 4-digit Access Code.
	Ex: 1	2 3 4
5	SET
6	Select Restriction Level.
	1 for All operations
	or
	2 for Setting and Printing the Fax Parameters only.
7	Ex: 2
	SET	STOP

SET MODE (1-6)

ENTER NO. OR ∨ ∧

FAX PARAMETER(01-99)

NO.=❚

38 ACCESS CODE

❚❚❚❚

38 ACCESS CODE

1234

38 ACCESS CODE

1:ALL 1234

38 ACCESS CODE 2:PARAMETERS 1234

NOTE

1. To erase the Access Code, enter the Access Code and press procedure above to step 3, then press CLEAR SET and

SET

STOP

and follow the

.

86